Everything your borehole needs, in one box
Pump, motor, control box, cable, rope, well seal and adaptors — supplied complete and fitted by our own team. No chasing five suppliers for parts that don't match.
One carton. Eight parts.
Nothing left to buy.
A Master Pack is a matched set. The motor is sized to the pump, the cable is sized to the depth, and the control box is the one that belongs to both. Open it and the installation can start the same day.
- Submersible pumpStainless
- MotorMatched to pump
- Control boxPre-wired
- Well seal / borehole capAlu cast
- Submersible cableUp to 100 m
- Nylon suspension ropeUp to 110 m
- AdaptorsTwo
- Insulation tapeIncluded
Want to know which pack your borehole takes, and what it costs fitted?
Get my pricePick by horsepower,
not by guesswork
Horsepower is decided by how deep your water sits and how far it has to be pushed. If you're not sure, don't guess — the free site inspection settles it before you spend anything.
- Typically under 40 m
- Home supply and small garden
- Complete Master Pack
- Typically 40 – 70 m
- House, tank and irrigation lines
- Complete Master Pack
- Typically 70 – 100 m
- Farms, lodges, schools, churches
- Complete Master Pack
Cable length is depth.
Get it right once.
A pump that fits with a cable that's short means a second trip and a second bill. These are the standard builds — we confirm which one your borehole takes during the inspection.
3" Master Pack
Narrow casing| Pack | Core kit | Cable | Rope | Fittings |
|---|---|---|---|---|
| MP 1 | Pump + Motor + Control box | 0.75 mm × 40 m | 50 m | Alu cast base plate + 2 adaptors |
| MP 2 | Pump + Motor + Control box | 1.25 mm × 80 m | 90 m | Alu cast base plate + 2 adaptors |
| MP 3 | Pump + Motor + Control box | 1.5 mm × 100 m | 110 m | Alu cast base plate + 2 adaptors |
4" Master Pack
Standard casing| Pack | Core kit | Cable | Rope | Fittings |
|---|---|---|---|---|
| MP 1 | Pump + Motor + Control box | 1.5 mm × 60 m | 70 m | Alu cast base plate + 2 adaptors |
| MP 2 | Pump + Motor + Control box | 1.5 mm × 70 m | 80 m | Alu cast base plate + 2 adaptors |
| MP 3 | Pump + Motor + Control box | 1.5 mm × 80 m | 90 m | Alu cast base plate + 2 adaptors |
| MP 4 | Pump + Motor + Control box | 2.0 mm × 80 m | 90 m | Alu cast base plate + 2 adaptors |
Not sure which configuration your borehole needs? That's what the free inspection is for.
Book the inspectionWe measure first,
then we quote
The inspection costs you nothing and it's the only honest way to size a pump. Four steps from your first message to water at the tap.
Answer six questions
Depth, use and timing. Two minutes on this page saves a twenty minute phone call and tells us which pack to load.
We come and look
Casing size, water level, power supply and the run to your tank. You leave with the pack and installation cost in writing.
Supply and fit
Our own team lowers the pump, fits the well seal, runs the cable and wires the control box. No subcontractor you've never met.
Test and hand over
We run the pump, check delivery, walk you through the control box and leave the paperwork with you.
Step one takes two minutes and you can do it right now.
Start with the six questionsSix questions.
Then we know what to bring.
We only take on installations we can do properly, so we ask first. If it's a fit, this hands you to WhatsApp with your answers already written out.
Is the borehole already drilled?
Plumbit supplies and installs pumps. Drilling is a different trade.
How deep is it?
Depth decides horsepower and cable length. A rough figure is fine.
What is the water for?
Household demand and farm demand size very differently.
When do you want it installed?
Straight answer please. It decides whether we hold stock for you.
Packs run K7,200 to K10,890, plus installation. Does that work?
Better you know now than at the gate.
Where are we coming to?
Name and area only. Nothing is sent until you press the button on the next screen.
Add your name and area so we know who's asking and where to go.
You're set. Here's what we'd bring.
Based on your answers, this is the pack we'd quote on. The site inspection confirms it before you pay anything.
Let's inspect before we quote
There's enough here to be worth a visit, but not enough to size a pump honestly. The inspection is free and there's no obligation afterwards.
Trade enquiry
Dealer pricing is a separate sheet with volume terms. Send this through and the trade desk will come back to you.
Come back when the hole is in the ground
You're gathering prices, which is a fair thing to do. But a quote given today will be wrong by the time you're ready, because pump size depends on the depth your driller actually hits.
Get the borehole drilled, and ask the driller for the depth and water level in writing. Then save this page. When you have those figures we'll size it in one call.
Prefer to talk it through anyway? The shop line is +260 776 156 555, or come to 1636 Malambo Road.
Already know which pump you need? Skip the questions.
Dealer pricing for hardware stores and installers
If you're selling on or fitting pumps for your own clients, you shouldn't be buying at retail. Volume terms on 3" and 4" Master Packs, with stock held at Malambo Road.
The questions we get every week
If yours isn't here, ask on WhatsApp and we'll tell you plainly.
Do you drill boreholes too?+
Is installation included in the price?+
What does the free inspection cover?+
Can you install a pump I bought elsewhere?+
Do you deliver outside Lusaka?+
What backs the pump if something goes wrong?+
Water at the tap, or an honest answer why not
Six questions tells us your depth, your use and your timing. Then we bring the right pack the first time — or we come and measure for free before anyone quotes a figure.
Or call +260 776 156 555 · 1636 Malambo Road, Lusaka